HP ProCurve 7102dl Reference Manual page 513

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
snmp-server management-url <URL>
Use the snmp-server management-url command to specify the URL for the device's management
software. Use the no form of this command to remove the management URL.
Syntax Description
<URL> Specifies the URL for the management software.
Default Values
No default is necessary for this command.
Usage Examples
The following example specifies the URL http://www.mywatch.com as the device's management software:
ProCurve(config)#snmp-server management-url http://www.mywatch.com
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 511