HP ProCurve 7102dl Reference Manual page 119

SROS Command Line Interface Reference Guide
debug ip pim-sparse hello
Use the debug ip pim-sparse hello command to display protocol-independent multicast (PIM) sparse
mode hello transactions. Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use
the no form of this command to disable debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates PIM sparse mode hello messages:
ProCurve>enable
ProCurve#debug ip pim-sparse hello
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
117