HP ProCurve 7102dl Reference Manual page 223

Secure router sros command line interface

Hide thumbs Also See for ProCurve 7102dl:

Table of Contents

SROS Command Line Interface Reference Guide

Functional Notes

The link state ID differs depending on whether the link state advertisement in question describes a network

or a router.

If describing a network, this ID is one of the following:

The network's IP address. This is true for type 3 summary link advertisements and in autonomous

system external link advertisements.

An address obtained from the link state ID. If the network link advertisement's link state ID is masked

with the network's subnet mask, this will yield the network's IP address.

If describing a router, this ID is always the router's OSPF router ID.

Usage Examples

The following example shows the database link state summary for all areas.

ProCurve>enable

ProCurve#show ip ospf database

OSPF router with ID: 0.0.0.0

Enable Mode Command Set

Chapters

Table of Contents