HP ProCurve 7102dl Reference Manual page 894

SROS Command Line Interface Reference Guide Frame Relay Interface Config Command Set
Usage Examples
The following example enables the Frame Relay multilink interface and sets the time between hello
messages to 45 seconds:
ProCurve(config)#interface frame-relay 1
ProCurve(config-fr 1)#frame-relay multilink hello 45
The following example specifies Class B operation:
ProCurve(config)#interface frame-relay 1
ProCurve(config-fr 1)#frame-relay multilink bandwidth-class b
The following example specifies Class C operation with a threshold of 5:
ProCurve(config)#interface frame-relay 1
ProCurve(config-fr 1)#frame-relay multilink bandwidth-class c 5
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 892