SROS Command Line Interface Reference Guide
qos-policy out <mapname>
Use the qos-policy out command to apply a previously-configured QoS map to an interface. Use the no
form of this command to remove the map from the interface. The keyword out specifies that this policy
will be applied to outgoing packets.
Syntax Description
<mapname>
Default Values
No default value is necessary for this command.
Usage Examples
The following example applies the QoS map VOICEMAP to the ATM sub-interface 1.1:
ProCurve(config)#interface atm 1.1
ProCurve(config-atm 1.1)#qos-policy out VOICEMAP
5991-2114
Specifies the name of a previously-created QoS map (refer to
<mapname><sequence number>
© Copyright 2006 Hewlett-Packard Development Company, L.P.
ATM Sub-Interface Config Command Set
on page 486 for more information).
qos map
779