HP ProCurve 7102dl Reference Manual page 746

SROS Command Line Interface Reference Guide
fair-queue <threshold>
Use the fair-queue command to enable weighted fair queuing (WFQ) on an interface. Use the no form of
this command to disable WFQ and enable first-in-first-out (FIFO) queueing for an interface. WFQ is
enabled by default for WAN interfaces.
Syntax Description
<threshold>
Default Values
By default, fair-queue is enabled with a threshold of 64 packets.
Usage Examples
The following example enables WFQ on the interface with a threshold set at 100 packets:
ProCurve(config)#interface atm 1.1
ProCurve(config-atm 1.1)#fair-queue 100
5991-2114
Optional. Specifies the maximum number of packets that can be present in each
conversation sub-queue. Packets received for a conversation after this limit is
reached are discarded. Range: 16 to 512.
© Copyright 2006 Hewlett-Packard Development Company, L.P.
ATM Sub-Interface Config Command Set
744