HP ProCurve 7102dl Reference Manual page 191

SROS Command Line Interface Reference Guide
show frame-relay multilink <interface> detailed
Use the show frame-relay multilink command to display information associated with the Frame Relay
multilink interface.
Syntax Description
<interface>
detailed
Default Values
No default value necessary for this command.
Usage Examples
The following is a sample output from this command:
ProCurve>enable
ProCurve#show frame-relay multilink
Bundle: frame-relay 1 is DOWN; class A bundle
Near-end BID: MFR1; Far-end BID: unknown
5991-2114
Optional. Specifies the display of information for a specific interface. Enter the
show frame-relay multilink ? command for a complete list of interfaces.
Optional. Use this optional keyword to display more detailed information.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
189