HP ProCurve 7102dl Reference Manual page 269

Secure router sros command line interface
Table of Contents

Advertisement

SROS Command Line Interface Reference Guide
interface <interface type>
ip crypto
policy-class
ip rtp
ip sdp
policy-class
probe
qos-map
router bgp
router ospf
router pim-sparse
router rip
track
verbose
Default Values
No default value necessary for this command.
Usage Examples
The following is a sample output from the show running-config command:
ProCurve>enable
ProCurve#show running-config
Building configuration...
!
no enable password
!
ip subnet-zero
ip classless
ip routing
!
event-history on
no logging forwarding
5991-2114
Displays the current running configuration for a particular interface.
Specifies an interface in the format <interface type [slot/port |
slot/port.sub-interface id | interface id | interface id.sub-interface id]>. For
example, for a T1 interface use t1 0/1; for an Ethernet sub-interface, use
eth 0/1.1; for a PPP interface, use ppp 1; and for an ATM sub-interface use
atm 1.1. Type show running-config interface? for a complete list of valid
interfaces.
Displays the current running configuration for all IPSec VPN settings.
Displays the current running configuration for all configured policy classes.
Displays the current running configuration for all IP Real-time Transport
Protocol (RTP) parameters.
Displays the current running configuration for all Session Description
Protocol (SDP) parameters.
Displays the current running configuration for all configured policy classes.
Displays the current configuration for all running probes.
Displays the current running configuration for all configured QoS maps.
Optional. Displays the current bgp configuration.
Optional. Displays the current ospf configuration.
Optional. Displays the current global PIM-SM configuration.
Optional. Displays the current RIP configuration.
Displays the current running configuration for all tracks.
Optional. Displays the entire running configuration to the terminal screen
(versus only the non-default values).
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
267

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve secure router 7203dl j8753a j8753a

Table of Contents