SROS Command Line Interface Reference Guide
line-timeout <minutes>
Use the line-timeout command to specify the number of minutes a line session may remain inactive before
the SROS terminates the session. Use the no form of this command to return to the default value.
Syntax Description
<minutes>
Default Values
By default the line-timeout is set to 15 minutes.
Usage Examples
The following example specifies a timeout of 2 minutes for all SSH sessions:
ProCurve(config)#line ssh 0 4
ProCurve(config-ssh0-4)#line-timeout 2
5991-2114
Specifies the number of minutes a line session may remain inactive before the
SROS terminates the session. Valid range: 0 to 35,791.
Entering a line-timeout value of 0 disables the feature.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Line (SSH) Interface Config Command Set
567