HP ProCurve 7102dl Reference Manual page 199

SROS Command Line Interface Reference Guide
show ip access-lists <listname>
Use the show ip access-lists command to display all configured IP access lists in the system.
Syntax Description
<listname>
Default Values
No default value necessary for this command.
Functional Notes
The show ip access-lists command displays all configured IP access lists in the system. All entries in the
access list are displayed, and a counter indicating the number of packets matching the entry is listed.
Usage Examples
The following is a sample output from the show ip access-lists command:
ProCurve>enable
ProCurve#show ip access-lists
Standard IP access list MatchAll
permit host 10.3.50.6 (0 matches)
permit 10.200.5.0 wildcard bits 0.0.0.255 (0 matches)
Extended IP access list UnTrusted
deny icmp 10.5.60.0 wildcard bits 0.0.0.255 any source-quench (0 matches)
deny tcp any any (0 matches)
5991-2114
Optional. Specify a particular access list to display.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
197