HP ProCurve 7102dl Reference Manual page 8

SROS Command Line Interface Reference Guide
Level Access by...
Enable
entering
Basic command security level
as follows:
>enable
Note
To prevent unauthorized users from accessing the configuration functions of your product,
immediately install an Enable-level password. Refer to the Quick Configuration Guides
and Quick Start Guides located on the Secure Router OS Documentation CD provided
with your unit for more information on configuring a password.
Understanding Configuration Modes
The SROS has four configuration modes to organize the configuration commands – Global, Line, Router,
and Interface. Each configuration mode supports a set of commands specific to the configurable
parameters for the mode. For example, all Frame Relay configuration commands are accessible only
through the Interface Configuration mode (for the virtual Frame Relay interface). The following table
contains a brief description of each level.
Mode Access by...
Global
entering
config
command security level prompt.
For example:
>enable
#config term
Line specifying a line (console or Telnet)
while at the Global Configuration
mode prompt.
For example:
>enable
#config term
(config)#line console 0
5991-2114
Prompt
enable while in the ProCurve#
Sample Prompt
while at the Enable
ProCurve(config)#
ProCurve(config-con0)#
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Understanding Configuration Modes
With this level you can...
• manage the startup and running
configurations
• use the debug commands
• enter any of the configuration modes
With this mode you
can...
• set the system's
Enable-level
password(s)
• configure the
system global IP
parameters
• configure the SNMP
parameters
• enter any of the
other configuration
modes
• configure the
console terminal
settings (datarate,
login password,
etc.)
• create Telnet logins
and specify their
parameters (login
password, etc.)
6