SROS Command Line Interface Reference Guide
Frame Relay Sub-Interface Config Command Set
lldp receive
Use the lldp receive command to allow LLDP packets to be received on this interface.
Syntax Description
No subcommands.
Default Values
By default, all interfaces are configured to send and receive LLDP packets.
Usage Examples
The following example configures the Frame Relay sub-interface to receive LLDP packets:
ProCurve(config)#interface frame-relay 1.16
ProCurve(config-fr 1.16)#lldp receive
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
957