HP ProCurve 7102dl Reference Manual page 211

SROS Command Line Interface Reference Guide
show ip cache
Use the show ip cache command to display the fast cache table.
Syntax Description
No subcommands.
Default Values
No default necessary for this command.
Usage Examples
The following example shows sample output from the show ip cache command:
ProCurve>enable
ProCurve#show ip cache
DESTINATION INTERFACE
10.17.6.52 Loopback
172.22.77.80 eth 0/1
10.17.255.255 Loopback
5991-2114
NEXT HOP USE COUNT
172.20.0.1 231
10.17.254.254 0
172.20.0.1 16
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
MAC ADDRESS
00:12:79:11:BA:32
209