HP ProCurve 7102dl Reference Manual page 881

SROS Command Line Interface Reference Guide Frame Relay Interface Config Command Set
encapsulation frame-relay ietf
Use the encapsulation frame-relay ietf command to configure the encapsulation on a virtual Frame Relay
interface as IETF (RFC 1490). Currently, this is the only encapsulation setting. Settings for this option
must match the far-end router's settings in order for the Frame Relay interface to become active.
Syntax Description
No subcommands.
Default Values
By default, all Frame Relay interfaces use IETF encapsulation.
Usage Examples
The following example configures the endpoint for IETF encapsulation:
ProCurve(config)#interface frame-relay 1
ProCurve(config-fr 1)#encapsulation frame-relay ietf
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 879