HP ProCurve 7102dl Reference Manual page 579

SROS Command Line Interface Reference Guide
bonding txcid-timer <seconds>
Use the bonding txcid-timer command to specify the value (in seconds) for the bearer channel
(B-channel) negotiation timeout. Use the no form of this command to return to the default value.
Syntax Description
<seconds>
Default Values
By default, the bonding txcid-timer value is set to 5 seconds.
Functional Notes
Specifies the length of time both endpoints attempt to negotiate an agreeable value for bearer channels
and channel capacities before deciding the bonding call has failed.
Usage Examples
The following example defines a bonding txcid-timer value of 8 seconds:
ProCurve(config)#interface bri 1/2
ProCurve(config-bri 1/2)#bonding txcid-timer 8
5991-2114
Specifies the number of seconds the endpoint may negotiate data rates and
channel capacities before considering the bonding negotiation a failure.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
BRI Interface Configuration Command set
577