HP ProCurve 7102dl Reference Manual page 26

SROS Command Line Interface Reference Guide Enable Mode Command Set
clear access-list <listname>
Use the clear access-list command to clear all counters associated with all access lists (or a specified
access list).
Syntax Description
<listname> Optional. Specifies the name (label) of an access list
Default Values
No default value necessary for this command.
Usage Examples
The following example clears all counters for the access list labeled MatchAll:
ProCurve>enable
ProCurve#clear access-list MatchAll
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 24