HP ProCurve 7102dl Reference Manual page 890

SROS Command Line Interface Reference Guide Frame Relay Interface Config Command Set
frame-relay lmi-t391dte <seconds>
Use the frame-relay lmi-t391dte command to set the T391 signal polling timer for the DTE endpoint.
Typical applications should leave the default value for this timer. Use the no form of this command to
return to the default value.
Syntax Description
<seconds> Sets the timer value in seconds (Range: 5 to 30).
Default Values
By default, the signal polling timer for the DTE endpoint is set to 10 seconds.
Functional Notes
The T391 timer sets the time (in seconds) between polls to the Frame Relay network.
Usage Examples
The following example sets the T391 timer for 15 seconds:
ProCurve(config)#interface frame-relay 1
ProCurve(config-fr 1)#frame-relay lmi-t391dte 15
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 888