HP ProCurve 7102dl Reference Manual page 172

SROS Command Line Interface Reference Guide
show connections
Use the show connections command to display information (including TDM group assignments) for all
active connections.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Usage Examples
The following is sample output from the show connections command:
ProCurve>enable
ProCurve#show connections
Displaying all connections....
Conn ID From
1 atm 1
2 ppp 1
3 ppp 1
4 ppp 3
5 ppp 3
6 ppp 3
5991-2114
To
adsl 1/1
t1 2/1, tdm-group 1
t1 2/2, tdm-group 1
e1 3/1, tdm-group 1
e1 3/2, tdm-group 1
e1 3/3, tdm-group 1
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
170