HP ProCurve 7102dl Reference Manual page 29

Secure router sros command line interface

Hide thumbs Also See for ProCurve 7102dl:

Table of Contents

SROS Command Line Interface Reference Guide

Enable Mode Command Set

clear bridge <group#>

Use the clear bridge command to clear all counters associated with bridging (or for a specified

bridge-group).

Syntax Description

Optional. Specifies a single bridge group (1-255).

Default Values

No default value necessary for this command.

Usage Examples

The following example clears all counters for bridge group 17:

ProCurve>enable

ProCurve#clear bridge 17

Chapters

Table of Contents