HP ProCurve 7102dl Reference Manual page 285

SROS Command Line Interface Reference Guide
show tech [terminal]
Use the show tech command to create a file showtech.txt located in flash memory that contains pertinent
system information collected from various show commands. Instead of writing to a file, display the created
file on the terminal screen using the terminal option.
Syntax Description
terminal
Default Value
No default value necessary for this command.
Functional Notes
The show tech command runs a system file that creates a showtech.txt file in flash memory that contains
terminal displays from the following show commands:
show version
show modules
show flash
show cflash
show running-config verbose
show interfaces
show atm pvc
show dial-backup interfaces
show frame-relay lmi
show frame-relay pvc
show ip bgp neighbors
show ip bgp summary
show ip ospf neighbor
show ip ospf summary-address
show ip mroute
show ip bridge
show spanning-tree
show ip interfaces
show connections
show arp
show ip traffic
show tcp info
show ip protocols
show ip route
show ip access-lists
show event-history
show output-startup
5991-2114
Optional. The terminal option displays the showtech.txt file output to the
terminal screen real-time.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
283