HP ProCurve 7102dl Reference Manual page 264

SROS Command Line Interface Reference Guide
show queuing [fair]
Use the show queuing command to display information associated with configured queuing methods.
Syntax Description
fair
Default Values
No default value necessary for this command.
Usage Examples
The following is a sample output from the show queuing command:
ProCurve>enable
ProCurve#show queuing
Interface Discard threshold
fr 1 64
fr 2 64
ppp 1 64
5991-2114
Optional keyword used to display only information on the weighted fair queuing
configuration.
Conversation subqueues
256
256
256
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
262