HP ProCurve 7102dl Reference Manual page 232

SROS Command Line Interface Reference Guide
show ip policy-class <policyname>
Use the show ip policy-class command to display the configured session limit and specific host IP
addresses of all current sessions. See ip policy-class <policyname> on page 426 for information on
configuring access policies. Variations of this command include:
show ip policy-class
show ip policy-class <policyname>
show ip policy-class host-sessions
show ip policy-class <policyname> host-sessions
Syntax Description
host-sessions
<policyname>
Default Values
No default value necessary for this command.
Usage Examples
The following is a sample output from the show ip policy-class commandProCurve>enable
ProCurve>enable
ProCurve#show ip policy-class
Maximum policy-sessions: 17400
Policy-class "Private":
136 current sessions (5800 max)
Entry 1 - allow list self self
Entry 2 - nat source list wizard-ics interface ppp 1 overload
Policy-class "Public":
0 current sessions (5800 max)
5991-2114
Optional. Displays specific host IP addresses of all current sessions
Optional. Displays policy class information for a specific policy class.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
230