HP ProCurve 7102dl Reference Manual page 167

SROS Command Line Interface Reference Guide
show buffers users [realtime]
Use the show buffers users command to display a list of the top users of packet buffers. Typically, this
command will only be used as a debug tool.
Syntax Description
realtime
Default Values
No default value necessary for this command.
Functional Notes
Use the realtime argument for this command to display full-screen output in real-time. Information is
continuously updated on the console until you either freeze the data (by pressing the F key) or exit reatime
mode (by pressing Ctrl-C). If there is not enough room on the screen for all available data, the information
will truncate at the bottom of the screen. In order to maximize the amount of data displayed, increase the
terminal length (using the #terminal length command).
Usage Examples
The following is a sample from the show buffers users command:
ProCurve>enable
ProCurve#show buffers users
Number of users: 7
Rank User
1 0x0052f4f8
2 0x0051a4fc
3 0x00528564
4 0x0053c1c8
5 fixedsize
6 0x001d8298
7 0x0010d970
8 0x00000000
9 0x00000000
10 0x00000000
11 0x00000000
12 0x00000000
13 0x00000000
14 0x00000000
15 0x00000000
5991-2114
Displays full-screen output in real-time. See the Functional Notes below for more
information.
Count
59
32
8
7
5
2
1
0
0
0
0
0
0
0
0
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
165