HP ProCurve 7102dl Reference Manual page 133

SROS Command Line Interface Reference Guide
debug isdn verbose
Use the debug isdn verbose command to activate all debug messages associated with integrated services
digital network (ISDN) events in the SROS. Debug messages are displayed (real-time) to the terminal (or
Telnet) screen. Use the no form of this command to disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates all debug messages associated with ISDN activity:
ProCurve>enable
ProCurve#debug isdn verbose
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
131