SROS Command Line Interface Reference Guide
Modem Interface Configuration Command Set
dialin
Use the dialin command to enable the modem for remote console dial-in, disabling the use of the modem
for backup. Use the no form of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, dialin is disabled.
Usage Examples
The following example enables remote console dial-in:
ProCurve(config)#interface modem 1/2
ProCurve(config-modem 1/2)#dialin
5991-2114
© Copyright 2006 Hewlett-Packard Development Company, L.P.
696