HP ProCurve 7102dl Reference Manual page 673

SROS Command Line Interface Reference Guide
spanning-tree bpduguard [enable | disable]
Use the spanning-tree bpduguard command to enable or disable the bpduguard on a specific interface.
This setting overrides the related global setting (see spanning-tree forward-time <seconds> on page 523).
Use the no version of the command to return to the default setting.
Syntax Description
enable
disable
Default Values
By default, this setting is disabled.
Functional Notes
The bpduguard blocks any BPDUs from being received on an interface.
Usage Examples
The following example enables the bpduguard on the interface eth 0/1:
ProCurve(config)#interface eth 0/1
ProCurve(config-eth 0/1)#spanning-tree bpduguard enable
The bpduguard can be disabled on the eth 0/1 by issuing the following commands:
ProCurve(config)#interface eth 0/1
ProCurve(config-eth 0/1)#spanning-tree bpduguard disable
5991-2114
Enables bpduguard for this interface.
Disables bpduguard for this interface.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Ethernet Interface Configuration Command Set
671