HP ProCurve 7102dl Reference Manual page 141

SROS Command Line Interface Reference Guide
debug sip stack
Use the debug sip stack command to activate debug messages associated with Session Initiation Protocol
(SIP) stack events. Debug messages are displayed (real-time) on the terminal (or Telnet) screen. Use the no
form of this command to disable the debug messages.Variations of this command include:
debug sip stack debug
debug sip stack errors
debug sip stack exceptions
debug sip stack info
debug sip stack messages
debug sip stack messages summary
debug sip stack verbose
debug sip stack warnings
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
debug
errors
exceptions
info
messages
verbose
warnings
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates all debug messages associated with SIP stack events:
ProCurve>enable
ProCurve#debug sip stack
5991-2114
Activates SIP stack debug event debug messages.
Activates SIP stack error event debug messages.
Activates SIP stack exception event debug messages.
Activates SIP stack info event debug messages.
Activates all SIP debug messages.
Activates all SIP stack event debug messages.
Activates SIP stack warning event debug messages.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
139