HP ProCurve 7102dl Reference Manual page 208

SROS Command Line Interface Reference Guide
show ip bgp regexp <expression>
Use the show ip bgp regexp command to display a summary of the BGP route table that includes routes
who autonomous system (AS) path matches the specified expression.
Syntax Description
<expression>
Default Values
No default value necessary for this command.
Functional Notes
Entries that are not filtered by prefix lists are marked with an asterisk (*) to show they are valid. Entries
that are deemed the best path to advertised route are marked with a caret (>).
Usage Examples
The following sample output of the show ip bgp regexp _303_ command shows all of the entries in the
BGP database that contain "303" in the AS path.
ProCurve#show ip bgp regexp _303_
BGP local router ID is 192.168.3.1, local AS is 304.
Status codes: * valid, > best, i - internal, o - local
Origin codes: i - IGP, e - EGP, ? - incomplete
Network NextHop
10.22.130.8/29 10.22.132.9
* i10.22.130.240/28 0.22.132.1
* 10.22.130.240/28 10.22.132.9
10.22.131.0/29 10.22.132.9
10.22.131.8/29 10.22.132.9
* i10.22.131.16/29 10.22.132.1
* 10.22.131.16/29 10.22.132.9
* i10.22.131.240/28 10.22.132.1
* 10.22.131.240/28 10.22.132.9
* 10.22.132.0/29 10.22.131.1
* 10.22.132.0/29 10.22.131.9
* i10.22.132.0/29 10.22.132.1
*> 10.22.132.0/29 10.22.132.9
* 10.22.132.8/29 10.22.131.1
* 10.22.132.8/29 10.22.131.9
5991-2114
Displays routes whose autonomous system (AS) path matches the regular
expression specified.
Metric
0
0
0
0
0
0
0
0
© Copyright 2007 Hewlett-Packard Development Company, L.P.
LocPrf Path
303 304 302 i
100 303 300 i
303 300 i
303 304 302 i
303 304 302 i
100 303 i
303 i
100 303 300 i
303 300 i
302 303 i
302 303 i
100 303 i
303 i
302 303 i
302 303 i
Enable Mode Command Set
206