SROS Command Line Interface Reference Guide
Global Configuration Mode Command Set
ip firewall alg sip udp <port#>
Use the ip firewall alg sip udp command to configure the user datagram protocol (UDP) port(s) for
Session Initiation Protocol (SIP) application-level gateways (ALG). For more details on SIP functionality
in the SROS, refer to the Functional Notes and Technology Review sections of the command
ip firewall alg [ftp | h323 | h323 timeout | pptp | sip] on page 399. Use the no form of this command to
return to the default settings.
Syntax Description
udp <port#>
Sets the UDP port. Valid range: 1 to 65,535. Multiple UDP ports can be entered.
Default Values
By default, the ALG for SIP is enabled and the UDP port is set to 5060.
Usage Examples
The following example enables port 1020 for UDP:
ProCurve(config)#ip firewall alg sip udp 1020
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
401