HP ProCurve 7102dl Reference Manual page 721

SROS Command Line Interface Reference Guide ATM Sub-Interface Config Command Set
atm routed-bridged ip
Use the atm routed-bridged ip command to enable routed IP bridge encapsulation (RBE) on an interface.
Use the no form of this command to disable RBE operation.
Syntax Description
>
No subcommands.
Default Values
By default, routed bridge encapsulation is disabled.
Usage Examples
The following example enables routed bridge encapsulation:
ProCurve(config)#interface atm 1.1
ProCurve(config-atm 1.1)#atm routed-bridged ip
5991-2114 © Copyright 2006 Hewlett-Packard Development Company, L.P. 719