HP ProCurve 7102dl Reference Manual page 64

SROS Command Line Interface Reference Guide
clock [auto-correct-dst | no-auto-correct-dst]
The clock auto-correct-dst command allows the unit to automatically correct for Daylight Saving Time
(DST). Use the clock no-auto-correct-dst command to disable this feature.
Syntax Description
auto-correct-DST
no-auto-correct-DST
Default Values
By default DST correction takes place automatically.
Functional Notes
Depending on the clock timezone chosen (see
one-hour DST correction may be enabled automatically. You may override this default using this
command.
Usage Examples
The following example allows for automatic DST correction:
ProCurve>enable
ProCurve#clock auto-correct-dst
The following example overrides the one-hour offset for DST:
ProCurve>enable
ProCurve#clock no-auto-correct-dst
5991-2114
Configures the unit to automatically correct for DST.
Disables DST correction.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
clock timezone <text> on page 64 for more information)
Enable Mode Command Set
62