HP ProCurve 7102dl Reference Manual page 231

SROS Command Line Interface Reference Guide
show ip policy
Use the show ip policy command to display which route-map is associated with which interface for
policy-based routing.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Usage Examples
The following is sample output from this command:
ProCurve>enable
ProCurve#show ip policy
Interface Route-map
eth 0/2 equal
eth 0/3 AAA-02/06/04-14:01:26.619-1-AppSpec (Dynamic)
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
229