HP ProCurve 7102dl Reference Manual page 662

Secure router sros command line interface

Hide thumbs Also See for ProCurve 7102dl:

Table of Contents

SROS Command Line Interface Reference Guide

Ethernet Interface Configuration Command Set

lldp receive

Use the lldp receive command to allow LLDP packets to be received on this interface.

Syntax Description

No subcommands.

Default Values

By default, all interfaces are configured to send and receive LLDP packets.

Usage Examples

The following example configures Ethernet interface 0/1 to receive LLDP packets:

ProCurve(config-eth 0/1)#lldp receive

Chapters

Table of Contents