HP ProCurve 7102dl Reference Manual page 512

SROS Command Line Interface Reference Guide
snmp-server location <"string">
Use the snmp-server location command to specify the Simple Network Management Protocol (SNMP)
system location string. Use the no form of this command to return to the default value.
Syntax Description
"<string>"
Default Values
<string>
Usage Examples
The following example specifies a location of 5th Floor Network Room:
ProCurve(config)#snmp-server location "5th Floor Network Room"
5991-2114
Alphanumeric string encased in quotation marks (up to 32 characters in length)
used to populate the system location string.
ProCurve
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
510