HP ProCurve 7102dl Reference Manual page 58

SROS Command Line Interface Reference Guide
clear sip location [** | <username>]
Use the clear sip location command to clear session initiation protocol (SIP) location database statistics.
Syntax Description
**
<username>
Default Values
No default value necessary for this command.
Usage Examples
The following example deletes all dynamic location entries:
ProCurve>enable
ProCurve#clear sip location **
5991-2114
Clears all dynamic location entries.
Specifies specific username to clear.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
56