HP ProCurve 7102dl Reference Manual page 441

Secure router sros command line interface

Hide thumbs Also See for ProCurve 7102dl:

Table of Contents

SROS Command Line Interface Reference Guide

tag <number>

Default Values

By default, there are no configured routes in route table, and the tag of 0 is applied to the route.

Usage Examples

The following example adds a static route to the 10.220.0.0/16 network through the next-hop router

192.168.45.254 and a default route to 172.16.2.10:

ProCurve(config)#ip route 10.220.0.0 255.255.0.0 192.168.45.254

ProCurve(config)#ip route 0.0.0.0 0.0.0.0 172.16.2.10

Optional. Specifies a number to use as a tag for this route. Route tags are

used to label and filter routes when dynamically redistributing routes into a

routing protocol (such as RIP/OSPF/BGP). Range is 1 to 65,535.

Global Configuration Mode Command Set

Chapters

Table of Contents