HP ProCurve 7102dl Reference Manual page 30

SROS Command Line Interface Reference Guide Enable Mode Command Set
clear buffers max-used
Use the clear buffers max-used command to clear the maximum-used statistics for buffers displayed in
the show memory heap command.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Usage Examples
The following example clears the maximum-used buffer statics:
ProCurve>enable
ProCurve#clear buffers max-used
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 28