HP ProCurve 7102dl Reference Manual page 138

SROS Command Line Interface Reference Guide Enable Mode Command Set
debug probe <name>
Use the debug probe command to activate debug messages associated with activities performed by the
named probe object. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the
no form of this command to disable the debug messages. Variations of this command include:
debug probe
debug probe <name>
Syntax Description
<name> Optional. Specifies the probe object.
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates debug messages associated with all probe objects:
ProCurve>enable
ProCurve#debug probe
The following example activates debug messages associated with the probe object named probe_A:
ProCurve>enable
ProCurve#debug probe probe_A
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 136