SROS Command Line Interface Reference Guide
Frame Relay Sub-Interface Config Command Set
spanning-tree edgeport
Use the spanning-tree edgeport command to set this interface to be an edgeport. This command overrides
the Global setting. Use the no form of this command to return the interface to normal operation
(non-edgeport).
Syntax Description
No subcommands.
Default Values
By default, this command is set to disable.
Usage Examples
The following example configures the interface to be an edgeport:
ProCurve(config)#interface frame-relay 1.16
ProCurve(config-fr 1.16)#spanning-tree edgeport
An individual interface can be configured to not be considered an edgeport. For example:
ProCurve(config)#interface frame-relay 1.16
ProCurve(config-fr 1.16)#no spanning-tree edgeport
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
965