HP ProCurve 7102dl Reference Manual page 448

SROS Command Line Interface Reference Guide
ip sip registrar [authenticate | default-expires | max-expires |
min-expires | realm] <timevalue>
Use the ip sip registrar command to enable and configure the SIP registrar server used for registering
User Agents (UAs) into the location database. For more details on SIP operation, refer to the Technology
Review section of the command ip firewall alg [ftp | h323 | h323 timeout | pptp | sip] on page 399. Use the
no form of the ip sip registrar command to disable the registrar server.
Syntax Description
authenticate
default-expires
max-expires
min-expires
realm
<timevalue>
Default Values
By default, the SIP registrar server is disabled.
Usage Examples
The following example sets the default expiration to 5 seconds:
ProCurve(config)#ip sip registrar default-expires 5
The following example sets the realm string:
ProCurve(config)#ip sip registrar realm voice.procurve.com
5991-2114
Specifies that authentication is required for each UA during registration.
Specifies the default expiration period for the UA listing in the location database.
UAs requesting registration without specifying an expiration period are given the
default expiration period.
Specifies the maximum expiration period for the UA listing in the location
database. All UAs registering with the SIP proxy server request an expiration
period for the listing in the database. UAs requesting an expiration period between
the max-expires and min-expires values are honored. Enter a time in seconds
from 0 to 2,592,000.
Specifies the minimum expiration period for the UA listing in the location
database. All UAs registering with the SIP proxy server request an expiration
period for the listing in the database. UAs requesting an expiration period between
the max-expires and min-expires values are honored. Enter a time in seconds
from 0 to 2,592,000.
Specifies a realm (enter a ascii character string) for the UA listing in the location
database.
Specifies time in seconds.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
446