SROS Command Line Interface Reference Guide
Enable Mode Command Set
erase file-system cflash
Use the erase file-system cflash command to erase all files on the installed compact flash card.
Note
Erasing the file system is equivalent to formatting the compact flash card.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Usage Examples
The following example erases all files located on the installed compact flash card:
ProCurve>enable
ProCurve#erase file-system cflash
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
152