HP ProCurve 7102dl Reference Manual page 331

SROS Command Line Interface Reference Guide
boot system [cflash | flash] <filename> [no-backup | [cflash | flash]
<backup filename>] [verify]
Use the boot config command to specify the system software loaded at startup.
Syntax Description
cflash
flash
<filename>
no-backup
<backup filename>
verify
Default Values
No default is necessary for this command.
Functional Notes
Detailed instructions for upgrading the SROS and loading files into memory are found on your ProCurve
SROS Documentation CD.
Usage Examples
The following example specifies the file SROS.BIZ, stored in flash memory, as the startup software:
ProCurve(config)#boot system flash SROS.BIZ
5991-2114
Specifies primary/backup file located in compact flash memory.
Specifies primary/backup file located in flash memory.
Specifies the filename of the software (filenames are case-sensitive) - software
files should have a .biz or .BIZ extension.
Specifies that no backup software is to be saved to the system.
Specifies a name for the backup software.
Specifies a verification of the software checksum.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
329