HP ProCurve 7102dl Reference Manual page 856

SROS Command Line Interface Reference Guide
ip route-cache
Use the ip route-cache command to enable fast-cache switching on the interface. Use the no form of this
command to disable fast-cache switching and return to process switching mode.
Note Using Network Address Translation (NAT) or the SROS firewall capabilities on an
interface requires process switching mode (using the no ip route-cache command).
Syntax Description
No subcommands.
Default Values
By default, route caching is enabled on all interfaces.
Functional Notes
Fast-cache switching allows an IP interface to provide optimum performance when processing IP traffic.
Usage Examples
The following example enables fast-cache switching on the virtual demand interface:
ProCurve(config)#interface demand 1
ProCurve(config-demand 1)#ip route-cache
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P.
Demand Interface Configuration Command Set
854