HP ProCurve 7102dl Reference Manual page 63

SROS Command Line Interface Reference Guide
clear user [console <user number> | ssh <user number> |
telnet <user number>]
Use the clear user command to detach a user from a given line.
Syntax Description
console <user number> Detaches a specific console user. Valid range is 0 to 1.
ssh <user number>
telnet <user number>
Default Values
No default value necessary for this command.
Usage Examples
The following example detaches the console 1 user:
ProCurve>enable
ProCurve#clear user console 1
5991-2114
Detaches a specific secure shell (SSH) user. Valid range is 0 to 4.
Detaches a specific Telnet user. Valid range is 0 to 5.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
61