HP ProCurve 7102dl Reference Manual page 393

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
ip domain-lookup
Use the ip domain-lookup command to enable the IP DNS (domain naming system), allowing DNS-based
host translation (name-to-address). Use the no form of this command to disable DNS.
Syntax Description
No subcommands.
Default Values
By default, this command is enabled.
Functional Notes
Use the ip domain-lookup command to enable the DNS client in the router. This will allow the user to
input web addresses instead of IP addresses for applications such as ping, Telnet, and traceroute.
Usage Examples
The following example enables DNS:
ProCurve(config)#ip domain-lookup
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 391