HP ProCurve 7102dl Reference Manual page 525

SROS Command Line Interface Reference Guide
spanning-tree forward-time <seconds>
Use the spanning-tree forward-time command to specify the delay interval (in seconds) when forwarding
spanning-tree packets. Use the no form of this command to return to the default interval.
Syntax Description
<seconds>
Default Values
<seconds>
Usage Examples
The following example sets the forwarding time to 15 seconds:
ProCurve(config)#spanning-tree forward-time 15
5991-2114
Forward delay interval in seconds (Range: 4 to 30).
15 seconds
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
523