Login Authentication <Aaa Login List - HP ProCurve 7102dl Reference Manual

SROS Command Line Interface Reference Guide Line (SSH) Interface Config Command Set
login authentication <aaa login list>
Use the login authentication command to assign the named AAA login list to use for authenticating users
connecting on this line. Use the no form of the command to remove the AAA authentication list.
Syntax Description
<aaa login list> Specifies the name of the AAA login list to use for authentication.
Default Values
The default value is the default AAA list.
Functional Notes
If the AAA subsystem is activated but no login authentication list is given, the default list is used. If the
default list is used but the default list is not configured, SSH uses the local user database.
Usage Examples
The following example specifies that myList will be used for authenticating users connecting on this line:
ProCurve(config)#line ssh 2
ProCurve(config-ssh2)#login authentication myList
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 568