HP ProCurve 7102dl Reference Manual page 147

SROS Command Line Interface Reference Guide
debug tftp [client packets | server events | server packets]
Use the debug tftp packets command to activate debug messages associated with Trivial File Transfer
Protocol (TFTP) packets. Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use
the no form of this command to disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
client packets
server events
server packets
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates debug messages associated TFTP server packets:
ProCurve>enable
ProCurve#debug tftp server packets
5991-2114
Activates TFTP client packet debug messages.
Activates TFTP server event debug messages.
Activates TFTP server packet debug messages.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
145