HP ProCurve 7102dl Reference Manual page 863

SROS Command Line Interface Reference Guide
match-interesting [list <acl name> | reverse list <acl name>] [in | out]
Use the match-interesting command to allow an access list (ACL) to specify which traffic attempting to
cross this interface will be considered interesting. Use the no form of this command to restore the default
values.
Syntax Description
list <acl name>
reverse list <acl name> Specifies using an ACL with reverse (destination, source) ACL matching logic.
in
out
Default Values
By default, no interesting traffic is defined.
Usage Examples
The following example instructs demand interface 1 to use the access list MyACL when checking for
interesting traffic:
ProCurve(config)#interface demand 1
ProCurve(config-demand 1)#match-interesting list MyACL in
5991-2114
Specifies using an ACL with normal (source, destination) ACL matching logic.
Optional. Specifies that only incoming traffic is interesting.
Optional. Specifies that only outgoing traffic is interesting.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Demand Interface Configuration Command Set
861