HP ProCurve 7102dl Reference Manual page 20

SROS Command Line Interface Reference Guide Basic Mode Command Set
telnet <address>
Use the telnet command to open a Telnet session (through the SROS) to another system on the network.
Syntax Description
<address> Specifies the IP address of the remote system.
Default Values
No default value necessary for this command.
Usage Examples
The following example opens a Telnet session with a remote system (10.200.4.15):
ProCurve>telnet 10.200.4.15
User Access Login
Password:
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 18